NANLUX Evoke 5000B - 5000 W Bi-Color LED-valo

NANLUX Evoke 5000B - 5000 W Bi-Color LED light

The NANLUX Evoke 5000B is an extremely powerful dual-color LED light for demanding film, television and large-scale productions. It delivers the same light output as traditional 9 kW HMI lights or massive 24 kW halogen lights, but with significantly better energy efficiency and without the start-up and cool-down delays. The entire system – light head, control unit and powerful power supply module – is integrated into a single magnesium alloy frame, eliminating the need for a separate power supply box lying on the ground. This speeds up setup and keeps cabling tidy on set.

The entire light system weighs 46 kg including the mounting bracket and is fully IP66 stormproof. The construction is resistant to direct rain, sand, dust and extreme humidity, allowing uninterrupted work in demanding outdoor shooting without the need for separate rain covers. The light comes with a completely redesigned 30-degree high-power reflector, which offers 26% more light output than previous reflector models.

Accurate Nebula B4 light engine and wide green/magenta correction

At the heart of the light is the Nebula B4 Bi-Color system, which enables a wide 2700K – 6500K color temperature range and precise green and magenta fine-tuning (G/M ±80 ?uv) across the entire spectrum. This prevents color shifts and allows for perfect calibration of the light tones with other light sources already on set, saving significant time in post-production.

Flicker-free high-speed shooting and mechanical control

The light offers completely flicker-free performance even at high-speed shooting of over 10,000 fps. The precise digital dimming operates smoothly from 0.0% to 100.0%. In low-light shooting, the adjustment operates in fine increments between 0.0% and 0.1%, so the light does not jump too bright at once, but allows for soft light transitions.

Mechanical handling is facilitated by the balance adjustment rails on the luminaire body, which make it easy to adjust the center of gravity when using heavy light modifiers. The mounting bracket with disc brakes holds the light securely at the desired angle, and the sliding rails on the bottom protect the frame from impacts when moving the equipment. The Nanlux NL accessory mount with PosiTight safety lock ensures secure attachment of modifiers.

Professional control and adjustable ventilation

The light can be controlled from the device's own 4.3-inch color display, with the included wired and magnetic-based controller (with an 8-meter cable), or wirelessly and with network cables:

• Wireless connectivity: Built-in LumenRadio CRMX for wireless light table control, Bluetooth-based NANLINK App 2.0 mobile control, NFC quick pairing, and ready for a separate 2.4G remote control.
• Wired network connections: 5-pin XLR DMX in/out ports with RDM support, plus two LAN ports supporting Art-Net and sACN protocols for controlling multiple universes.

The cooling system has five selectable fan modes (Smart, Full Speed, Low Speed, Off and Pause). In the automatic smart mode, the fan noise level remains very quiet (approximately 44 dBA), allowing for interference-free recording during interviews. In the Off and Pause modes, the fan turns off and the light output is limited to prevent overheating.

Key features

• Massive 5000W LED power: Replaces 9kW HMI and 24kW halogen lights with energy-efficient technology.
• IP66 Stormproof: Fully sealed magnesium body withstands pouring rain and dust without protective bags.
• Precise G/M correction (±80): Allows for perfect light matching with other light sources in the environment.
• Compatible with high-speed shooting: Flicker-free light for frame rates over 10,000 fps.
• All-In-One Design: Integrated power supply speeds up setup on location.

Specifications

• Model: NANLUX Evoke 5000B
• Rated power: 5000 W
• Light engine: Nebula B4 Bi-Color
• Color temperature range: 2700 K – 6500 K
• Green/Magenta adjustment: ±80 ?uv
• IP rating: IP66 (integrated light head and power supply)
• Weight: 46 kg (with mounting bracket)
• Display: 4.3" LCD color display
• Dimming: 0.0% – 100.0% (0.1% accuracy at low powers)
• Accessory mount: Nanlux NL mount
• Warranty: 3 years

The sales package includes:

• 1 x Evoke 5000B light unit
• 1 x Yoke with disc brakes
• 1 x 30° High-Output reflector
• 1 x Wired controller (incl. 8 m cable and magnetic base)
• 1 x AC power cable (2 m)
• 1 x USB flash drive
• 2 x User Manual