Stunning 1280x1080 thermal camera, IP55 rating, improved AI and night vision, and advanced obstacle detection system. 59 minutes of flight time and the new RC Plus 3 Enterprise controller.

Subscribe to availability notification, and you’ll receive an email as soon as the product is available again.
Pre-booking required. Price coming soon.
The DJI Matrice 5T is DJI's latest thermal imaging drone. The IP55-rated drone is equipped with a stunning 1280x1024 thermal camera, full-color night vision, built-in LiDAR and mmWave radar, 59 minutes of flight time, and the updated RC Plus 3 Enterprise controller.
The Matrice 5 series, released in late 2026, is DJI's latest drone series, which is positioned above the Matrice 4 series. The devices share an EASA C2/C6 classification and devices are also available in the C5 category. The Matrice 5 series thermal camera drones are designed for, among other things, rescue operations and inspections. Thanks to a laser rangefinder that reaches up to 3km, the drone can measure and model the target directly on site. The IP55-rated body is packed with built-in LiDAR and mmWave radar and Open Edge AI artificial intelligence. The device uses the new 04 Enterprise Enhanced video transmission protocol.
Drones have had thermal cameras with 640x512 resolution for a long time, but 1280x1024 resolution has been reserved for only the best and most powerful drones. Thermal camera units alone have cost 10,000-15,000 euros. The DJI Matrice 5T brings a 1280x1014 thermal camera to this price range for the first time. The device also has a UHR mode, which allows you to shoot 2560x2048 30fps video with the thermal camera.
The thermal camera lens has a cine equivalent of 53mm, a maximum aperture of f/0.85 and a viewing angle of 45 degrees. The thermal camera is able to focus from 10 meters to infinity and the camera has a 32x digital zoom. The thermal camera's sensitivity (NETD) is less than 50 millikelvins.
The thermal imager has the familiar high-gain and low-gain modes. In high-gain mode, temperatures can be measured using spot and area measurements between -20 and 150 degrees Celsius. In low-gain mode, temperatures can be measured over a wide range of 0 to 550 degrees Celsius. The measurement accuracy is 2% in high-gain mode and 3% or 5 degrees Celsius in low-gain mode.
The thermal camera has 10 different color palettes and the camera's image formats are the familiar JPEG (8 bits), R-JPEG (16 bits) and the new DLT-664 (UHS). Combined with the new artificial intelligence processor, the drone is able to detect and count, among other things, people, cars, ships and moving heat sources.
The DJI Matrice 5T has three 50 MP cameras, each focused on a slightly different purpose. The cameras' night vision capabilities have been improved with the help of NIR assist light and, as a new feature, night vision now works in all colors.
| Widescreen | Central | Tele | |
| Cell | 50MP, 1/0.98" CMOS | 50MP, 1/1.28" CMOS | 50MP, 1/1.5" RYYB |
| Cine equivalent focal length | 23.5mm | 70mm | 252mm |
| Luminous power | f/1.8 | f/2.88 | f/2.8 |
| Viewing angle DFOV° | 9.7° | 35° | 85.7° |
The cameras have a sensitivity of ISO 100-25600 in basic mode and 100-1638400 in night mode. The maximum image size that can be taken with the cameras is 8192×6144 pixels and the maximum video size is 3840×2160 @ 30fps.
The DJI Matrice 5T uses the new 04 Enterprise Enhanced protocol for communication between the drone and the controller. In addition, the drone now has two built-in 4G SIM slots (1 eSIM and 1 Nano-SIM), which are used to improve control and video connectivity in challenging conditions.
Using a 4G connection requires a local SIM card to be installed in the device. We always recommend choosing the card from the provider that has the best coverage in the drone's main operating area.
Like the Matrice 4, the 5-series also has a built-in RTK module, which can improve positioning accuracy to 10 centimeter accuracy using online correction data and to 1cm accuracy using the D-RTK3 ground base station.
The DJI Matrice 5 series has been introduced as a new feature. LiDAR, familiar from the Matrice 400 series, can detect targets up to 110 meters away. LiDAR is able to detect a 21.3mm high-voltage line from about 32 meters away. LiDAR works in all directions, i.e. 360 degrees.
The mmWave radar, on the other hand, detects obstacles forward, up and down, detecting a 10mm power line about 40 meters in front and about 20 meters below.
The research is complemented by an omnidirectional camera system and a bottom-facing ToF distance sensor. The camera system can be used to activate, among other things, Assist View mode, which gives the pilot a comprehensive situational picture of the drone's surroundings using wide-angle cameras.
Thanks to improved obstacle detection, the Matrice 5T drone features an automatic power line inspection mode, where the drone flies sideways in line with the power line and automatically follows it. The mode does not require a 3D model or RTK.
In DJI's previous Matrice 4 series, only fixed-body drones (Matrice 4D and 4TD) were IP55 rated. In the Matrice 5 series, the IP rating is now also available for folding-body drones.
The Matrice 5 is rated to withstand up to 100mm of rainfall in 24 hours. The device is rated for temperatures from -20 to 50 degrees Celsius. Thanks to its small size, the Matrice 5 fits into a small bag and the drone itself measures just 335 x 155 x 203mm when folded.
The DJI Matrice 5T comes with the RC Plus 3 Enterprise controller. The updated controller features a 7.44" display with a resolution of 1920x1080 and a refresh rate of 60Hz. The display has a brightness of 2000 nits.
Compared to the previous RC Plus 2 controller, the new controller has been made taller and slightly narrower. The controller has a robust 6933 mAh battery, which gives the controller approximately 6 hours of operating time. Due to the extended operating time, the new controller no longer accepts an additional battery like the old controllers.
The controller has a built-in 4G slot, so there is no need to purchase a 4G module separately. The controller also supports Wi-Fi 6 and Bluetooth 5.4 protocols. Like previous controllers, the controller runs on the Android operating system (Android 16) and is itself IP54 weather-rated.
As usual, the controller also has extensive connections for additional devices. The controller has an HDMI 1.4 output, a MicroSD card slot, a nano-SIM slot and an eSIM slot, a USB-C and an E-Port connection.
Due to its updated control protocol, RC Plus 3 is not compatible with previous DJI drones (e.g. Matrice 4, Mavic 3, Mavic 3D, Matrice 350/400).
The Matrice 5T drone comes with the same range of accessories as previous drones. The updated DJI AL2 searchlight and the DJI AS2 speaker are available. Batteries are not included with the drone, so you have to purchase them separately. The charging dock that comes with the drone can hold 3 DJI Matrice 5 Series Batteries at a time.
The drone comes with three pairs of 14.2" low-noise standard propellers . Anti-ice propellers are also available to reduce icing.
The price of the Matrice 5T drone includes DJI Care Enterprise Plus coverage for 12 months. DJI Care Enterprise is a security package designed specifically for DJI Enterprise products, allowing you to fly worry-free without fear of damage. Enterprise Care Plus coverage covers drone repairs during its validity period due to, for example, collision damage, water, signal interference, and user error. The coverage also includes free delivery to DJI service and return shipping. The coverage also covers the controller, but not other damage than to the drone package itself.
/dji-matrice-5t-lampokameradrone-easa-c2c6-06aedb1f111f2b.jpg)
/dji-matrice-5t-lampokameradrone-easa-c2c6-06aedb142ddb43.jpg)
/dji-matrice-5t-lampokameradrone-easa-c2c6-06aedb142de44b.jpg)