Manfrotto 269HDBU Super High Stand

Manfrotto 269HDBU Super High Stand

The 269HDBU is Manfrotto's really tall lighting stand, rising to a whopping 7.3 meters.

Sturdy 10kg Heavy Duty Stand for a boom or, for example, a large softbox. When fully extended, the stand can support a weight of 1kg, so even then the load capacity is sufficient for larger light shapers or lights.

Because the stand rises to a high height, there is a loop at the end of the stand for a support rope or guy wire. In addition, there are holes at the ends of the stand legs, which allow the stand to be anchored to the ground with, for example, "tent poles" or long screws. A high stand should always be supported when it is raised to its maximum height and there is a heavy load on the top. Especially in windy weather.

One of the legs of the light stand also has a so-called leveling leg, meaning that the length of the leg can be changed, making the stand stable even on uneven surfaces or terrain.

The 269HDBU tripod head features a pop-up style standard 5/8" (16mm) studio spigot with a 3/8" male thread. It is also possible to attach almost any sopigot part to the tip of the tripod according to your needs.

Wheels are available as an accessory for this tripod (compatible wheels Manfrotto 109, 110 and 110G).

Specifications:

• Load capacity: 10kg (1kg when fully extended)
• Max. Height: 730 cm
• Min. Height: 190 cm
• Leg sections/locks: 6/5
• Pipe thickness: 50, 45, 40, 35, 30, 25 mm
• Leg tube thickness: 30mm
• Transport length: 173cm
• Weight: 10 kg
  
  
• Air cushioning: No
• Leveling foot: Yes
• Footprint: 1.74m
• Foot shape: Round
• Possibility to attach rings: Yes (Manfrotto 103, 104, 104G)