DJI Neo 2 Digital Transceiver

DJI Neo 2 Digital Transceiver

An accessory for the DJI Neo 2 drone that creates an OcuSync connection between the controller and the drone.

You need this block if you want to fly the Neo 2 drone with the RC-N3 or RC2 Remote controllers, or with FPV goggles.

The module attaches to the USB-C port on the back of the Neo2 drone. The attachment is secured with screws.

Note! Check that the screws are tight at least every 30 flight hours (approximately 60 flights)

Dimensions: 44.6x27x44.6 mm
Weight: approx. 9 g