(Sold) Hähnel Captur remote release and flash trigger (Canon) (used)

Hähnel
630497eb34e1f5cd3c487ec183.jpg
630497eb34e1f5cd3c487ec183.jpg
39,90 €
Hähnel Captur Remote Control & Flash Trigger for Canon. Wireless remote trigger that can be expanded with separately purchased expansion parts. Range up to 100 meters. Warranty 1 month
Out of stock (Varastossa 0 kpl)

Tilaa saapumisilmoitus sähköpostiisi, niin saat heti tiedon kun tuotetta on jälleen saatavilla.

Katso yritysasiakkaan maksuvaihtoehdot

Hähnel Captur Remote Control & Flash Trigger (Canon)

Replacement remote release + flash trigger set. Like new and unused.

Warranty 1 month

Hähnel Captur is a new type of wireless radio-controlled remote trigger that can be expanded with separately purchased accessories.

Hähnel Captur combines two products into one - a wireless remote shutter release and a wireless flash trigger. Captur has a range of up to 100 meters, so you can use it for a variety of creative situations, even outdoors. With Captur, autofocus, picture taking, continuous shooting and timed exposure work as normal.

Includes transmitter and receiver.

Remote control:
When you press the remote shutter button halfway, the camera focuses, and when you press the button all the way down, the camera takes the picture. The shutter stays open as long as you press the button, if this function is selected on the camera. Burst shooting works the same way.

Wireless flash trigger:
The transmitter part is connected to the camera's accessory shoe, it transmits the flash information to the flash. The flash is set to manual mode, as TTL information is not transmitted to the flash.
Flash synchronization works with the camera and a hot shoe mounted flash.

This remote shutter release does not require line of sight to the camera. The Hähnel Captur remote shutter release uses the 2.4 GHz license-free frequency.

The Captur remote trigger can be purchased as additional accessories: the Captur Timer timer, the Captur Pro programmable trigger with motion, sound, light and IR sensors, and the Captur receiver, which can be used to control multiple flash units.

Quick guide to pairing DCM Digital Channel Match:

  1. Press the Transmitter button all the way down and turn on the device.
  2. When the green light flashes, release the button.
  3. Press the Receiver button all the way down and turn on the device.
  4. When the red light comes on, release the button.
When both devices are connected and turned on, the green lights flash and pairing is complete!


Suitable for at least the following cameras:

  • Canon EOS 1000D / 1100D / 55D / 450D / 400D / 350D / 300D / 500D / 550D / 600D / 50D / 40D / 30D / 20D / 10D / 7D / 5D /5D Mark II, III and IV / 1D / 1Ds / 1D Mark II / 1D Mark III / 1Ds Mark II / 1Ds Mark III, Canon EOS R5, EOS R6, EOS R, EOS RP
  • Canon PowerShot G10 / G11 / G12 / G15 / G16 / G1X / G1X Mark II

Arvostelujen yhteenveto

0,0

0%
0%
0%
0%
0%
Tuotteella ei ole vielä yhtään arvostelua.Kirjaudu sisään ja arvostele tuote.

Kysy tuotteesta

015 211 540
Avoinna myymälän aukioloaikoina
ma-pe 9-17 ja la 10-14
asiakaspalvelu@kameraliike.fi
Vastaamme asiakaspalvelun viesteihin viimeistään 24 h kuluessa
Mikkelin valokuvausliike Oy
Porrassalmenkatu 21 50100 Mikkeli
Payment methods
Muuta evästeasetuksia